ଛାଞ୍ଚ:Track gauge/doc
This is a documentation subpage for ଛାଞ୍ଚ:Track gauge. It may contain usage information, categories and other content that is not part of the original ଛାଞ୍ଚ page. |
This template uses Lua: |
This template accepts a track gauge and returns that defined track gauge well formatted, plus the converted size value by another unit:
{{Track gauge|1520 mm}}
→ ୧,୫୨୦ mm (4 ft 11 27⁄32 in){{Track gauge|4 ft}}
→ 4 ft (୧,୨୧୯ mm)
Extra options are available:
{{Track gauge|1520 mm|al=on|lk=on}}
→ ୧,୫୨୦ mm (4 ft 11 27⁄32 in)
Input options
[ସମ୍ପାଦନା]The first parameter specifies the gauge:
{{Track gauge|1435 mm}}
→ ୧,୪୩୫ mm (4 ft 8 1⁄2 in){{Track gauge|4 ft 8.5 in}}
→ 4 ft 8 1⁄2 in (୧,୪୩୫ mm){{Track gauge|4 ft 8 1/2 in}}
→ 4 ft 8 1⁄2 in (୧,୪୩୫ mm){{Track gauge|56.5 in}}
→ 4 ft 8 1⁄2 in (୧,୪୩୫ mm){{Track gauge|Standard gauge}}
→ ୧,୪୩୫ mm (4 ft 8 1⁄2 in)
Rail track gauges can be entered as they are defined: in units mm or ft in. Also common accepted names can be used, see below.
The input value (a length, in metric or imperial units) must be a defined track gauge. Currently 137 gauges are defined by metric units, and 136 by imperial units. Some are defined in both unit sytems, in both, such as the standard gauge.
- When an input value is not recognised by the template, the template simply returns the input as it is: {{Track gauge|25in}} → 25in
- The page with this unknown input is also listed in a maintenance category, in the background, that signals interested editors that there is a new rail gauge used in Wikipedia. More on this below.
- Some gauges in metric are defined in metres: 1 m is recognised. However, it is not available for all metric defined gauges. Using
mm
is a safer bet.
List of defined track gauges
[ସମ୍ପାଦନା]ଛାଞ୍ଚ:Track gauge/doc/input options
Formatting input
[ସମ୍ପାଦନା]When entering a track gauge (like {{Track gauge|1435mm}}
, these are formatting options. Keep in mind that only defined gauges are recognised.
Spacing is free, and fractions can be used in imperial units. Primes ('
and "
) may be used for [foot, inch]. Any [foot, inch] size can be entered in all-inches (4 ft 8 1/2 in
equals 56 1/2 in
and 56.5 in
).
Parameter input |
Result | Note |
---|---|---|
1435 mm |
୧,୪୩୫ mm (4 ft 8 1⁄2 in) | standard gauge |
standard gauge |
୧,୪୩୫ mm (4 ft 8 1⁄2 in) | standard gauge, by name |
4 ft 8.5 in |
4 ft 8 1⁄2 in (୧,୪୩୫ mm) | standard gauge, this way puts imperial units first |
UK sg |
4 ft 8 1⁄2 in (୧,୪୩୫ mm) | standard gauge, this way puts imperial units first |
56.5 in |
4 ft 8 1⁄2 in (୧,୪୩୫ mm) | standard gauge, by all-inches |
56.5" |
4 ft 8 1⁄2 in (୧,୪୩୫ mm) | standard gauge, using primes |
56 1/2 in |
4 ft 8 1⁄2 in (୧,୪୩୫ mm) | standard gauge, using slash for fraction |
1 m |
୧,୦୦୦ mm (3 ft 3 3⁄8 in) | 1 m is recognised, but not many more in m . Better use mm
|
16.5 mm |
୧୬.୫ mm (0.65 in) | HO scale model railway |
16.5 in |
16 1⁄2 in (୪୧୯ mm) | Miniature railway |
7 ft 0.25 in |
7 ft 1⁄4 in (୨,୧୪୦ mm) | Brunel |
2140 mm |
2140 mm | Not recognised (so no converted value). This track gauge, Brunel's, is not defined in mm. |
65 in |
65 in | Input not recognised (so no converted value); output copies the input. This is a good way to enter an uncovered rail gauge on a page: other editors will notice (and can add a new gauge to the template!). |
Parameters
[ସମ୍ପାଦନା]{{Track gauge | | lk=on | first=imp, met | disp= s, /, 1, br, [], <any literal text> | al=on | allk=on | nowrap=off (default), on, all | addcat=no | unitlink=on }}
Parameter | What it does | Example (code) | Example (output) | |
---|---|---|---|---|
lk=on | Links the defining measure (first measure) "defined size" depends on input |
{{Track gauge|3ft6in|lk=on}}
|
3 ft 6 in (୧,୦୬୭ mm) ୧,୦୬୭ mm (3 ft 6 in) | |
al=on | Adds the alternate name after the gauge measurement values | {{Track gauge|sg|al=on}}
|
୧,୪୩୫ mm (4 ft 8 1⁄2 in) | |
allk=on | Adds a wikilink to the alternate name where applicable | {{Track gauge|sg|allk=on}}
|
୧,୪୩୫ mm (4 ft 8 1⁄2 in) standard gauge | |
first=imp first=met |
Puts the requested measure first (metric, imperial) | {{Track gauge|1000mm|first=imp}}
|
3 ft 3 3⁄8 in (୧,୦୦୦ mm) | |
disp=any text | The text will be written between the measurements, two spaces added. Brackets are omitted. Text must be 2 characters or more. (codes for |disp= are processed as described: 1, s, /, br).
|
{{Track gauge|sg|disp=also defined as being}}
|
୧,୪୩୫ mm also defined as being 4 ft 8 1⁄2 in | |
disp=s or / | Uses a slash as a separator rather than parentheses | {{Track gauge|sg|disp=s}}
|
୧,୪୩୫ mm/4 ft 8 1⁄2 in | |
disp=[] | Uses a square brackets rather than parentheses | {{Track gauge|sg|disp=[]}}
|
୧,୪୩୫ mm [4 ft 8 1⁄2 in] | |
disp=1 | Only shows the first measure (may be used when repeated on a page or in conjunction with first= to display the output only)
|
{{Track gauge|sg|disp=1}}
|
୧,୪୩୫ mm | |
disp=br | Forces a line break after the first size (and also before any gauge name) | {{Track gauge|sg|disp=br}}
|
୧,୪୩୫ mm (4 ft 8 1⁄2 in) | |
nowrap=off (default), on, all | Sets possible line break (line wrap): after between the measurements (off=defalt), not (on, all), or not at all when named gauge is present. (note: until May 2014, default behaviour was no break between the measurements. This has changed.) | {{Track gauge|sg|nowrap=on}}
|
୧,୪୩୫ mm (4 ft 8 1⁄2 in) | |
addcat=no | Will not add a maintenance category | {{Track gauge|sg|addcat=no}}
|
୧,୪୩୫ mm (4 ft 8 1⁄2 in) | |
unitlink=on | Adds wikilinks to the measurement unit labels | {{Track gauge|sg|unitlink=on}}
|
୧,୪୩୫ mm (4 ft 8 1⁄2 in) |
- Names can be universal, being defined worldwide. For example: Iberian gauge, ୧,୬୬୮ mm (5 ft 5 21⁄32 in) . Other names can be localor culturally restricted, for example the name "Cape gauge" is used in South Africa for 3 ft 6 in (୧,୦୬୭ mm), but not in Japan (in Japan that same track gaugfe is not named).
- Also, two sizes can lead to one gauge name.
Named gauges
[ସମ୍ପାଦନା]Established gauge names can be entered. The word "gauge" can be omitted. Case-insensitive (A=a). See also the |al=
, |allk=
parameters (below), to show a gauge name in the outcome.
Input | Result | Note |
---|---|---|
{{Track gauge|Baltimore gauge}} | 5 ft 4 1⁄2 in (୧,୬୩୮ mm) | |
{{Track gauge|Baltimore}} | 5 ft 4 1⁄2 in (୧,୬୩୮ mm) | Omitting " gauge", same effect |
{{Track gauge|baltimore}} | 5 ft 4 1⁄2 in (୧,୬୩୮ mm) | Case-insensitive (A=a) |
{{Track gauge|baltimore|al=on}} | 5 ft 4 1⁄2 in (୧,୬୩୮ mm) | |al=on shows the alternative (name)
|
{{Track gauge|baltimore|allk=on}} | 5 ft 4 1⁄2 in (୧,୬୩୮ mm) Baltimore streetcar gauge | |allk=on shows the alternative (name), linked
|
{{Track gauge|baltimore|lk=on|al=on}} | 5 ft 4 1⁄2 in (୧,୬୩୮ mm) | |lk=on links the size (as always)
|
{{Track gauge|Baltimore streetcar gauge}} | 5 ft 4 1⁄2 in (୧,୬୩୮ mm) | This one has more names |
{{Track gauge|Bosnian}} | ୭୬୦ mm (2 ft 5 15⁄16 in) | |
{{Track gauge|Brunel}} | 7 ft (୨,୧୩୪ mm) | |
{{Track gauge|Cape}} | 3 ft 6 in (୧,୦୬୭ mm) | |
{{Track gauge|Iberian}} | ୧,୬୬୮ mm (5 ft 5 21⁄32 in) | |
{{Track gauge|Indian}} | 5 ft 6 in (୧,୬୭୬ mm) | |
{{Track gauge|Victorian}} | ୧,୬୦୦ mm (5 ft 3 in) | |
{{Track gauge|Irish}} | 5 ft 3 in (୧,୬୦୦ mm) | |
{{Track gauge|metre}} | ୧,୦୦୦ mm (3 ft 3 3⁄8 in) | |
{{Track gauge|Ohio}} | 4 ft 10 in (୧,୪୭୩ mm) | |
{{Track gauge|Pennsylvania}} | 5 ft 2 1⁄2 in (୧,୫୮୮ mm) | |
{{Track gauge|Pennsylvania trolley}} | 5 ft 2 1⁄2 in (୧,୫୮୮ mm) | |
{{Track gauge|Russian}} | ୧,୫୨୦ mm (4 ft 11 27⁄32 in) | |
{{Track gauge|Scotch}} | 4 ft 6 in (୧,୩୭୨ mm) | |
{{Track gauge|standard gauge}} | ୧,୪୩୫ mm (4 ft 8 1⁄2 in) | Also: "sg", "metsg" (metric units first) |
{{Track gauge|US sg}} | 4 ft 8 1⁄2 in (୧,୪୩୫ mm) | Also: "imp sg", "UK sg", "NA sg" (imperial units first) |
{{Track gauge|Swedish three foot}} | ୮୯୧ mm (2 ft 11 3⁄32 in) | |
{{Track gauge|Swedish}} | ୮୯୧ mm (2 ft 11 3⁄32 in) | |
{{Track gauge|Toronto}} | 4 ft 10 7⁄8 in (୧,୪୯୫ mm) |
For articles written in US-English, it is possible to set parameter |engvar=en-US
. In this situation, the US-English spelling is shown (metER):
- ୧,୦୦୦ mm (3 ft 3 3⁄8 in) meter gauge
Why not use {{Convert}}?
[ସମ୍ପାଦନା]To convert a track gauge, using {{Convert}} comes to mind. For example, standard gauge:
- {{Convert|1435|mm|ftin|abbr=on}} → 1,435 mm (4 ft 8.5 in)
- However, this has some disadvantages. First of all, track gauges are defined by an institute, not just measured. The list of defined track gauges is limited, and oversee-ablle (today: some 260 sizes, by mm, are defined).
- Using {{Track gauge}} allows us to track (follow) all articles with a specific gauge (see the options-list on this page, and Category:Articles that mention a specific track gauge).
- Also, the track definition can be directly linked to the sourcing article: ୧,୦୬୭ mm (3 ft 6 in).
- Further more, the template allows to recognise named gauges such as "Russian gauge".
Tracking category
[ସମ୍ପାଦନା]- {{Track gauge}} detects that an undefined gauge is entered, and signal for maintenance. For example, metre gauge is only defined in metric. Entering an imperial size would categorise that article in Category:Articles using template 'Track gauge' with unrecognized input (୦).
TemplateData
[ସମ୍ପାଦନା]
This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Track gauge in articles based on its TemplateData.
TemplateData for Track gauge The template formats a track gauge size into standard notation and adds the conversion into the imperial/metric (other) size
|
See also
[ସମ୍ପାଦନା]ଛାଞ୍ଚ:Navbox track gauge categories
- Sources
External links
[ସମ୍ପାଦନା]- Sources
- Light Rail Transit Association (LRTA)
- Morrisson, Allen (2013). "Electric transport in latin america".
{{cite web}}
: Cite has empty unknown parameter:|1=
(help) Latin America is very well covered - "A world of trams and urban transit". Light Rail Transit Association (LRTA)). UK based, covering most countries
- Scaled rail models
- "S-3.1 Trackwork, Proto & Fine Scales". NMRA. 2004.
- "S-3.2 Trackwork Standard Scales (metric)" (PDF). NMRA. 2010.