ଛାଞ୍ଚ:Football squad on pitch/doc
 | This is a documentation subpage for ଛାଞ୍ଚ:Football squad on pitch. It may contain usage information, categories and other content that is not part of the original ଛାଞ୍ଚ page. |
This template is used to generate an image map, showing the members of an association football squad on a football pitch. The position names and locations are specified per association football positions. The template does not check to make sure there are the correct number of players on the field.
Usage
[ସମ୍ପାଦନା]
{{football squad on pitch
| GK_nat = | GK =
| RB_nat = | RB =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat = | LB =
| RCM_nat = | RCM =
| LCM_nat = | LCM =
| SS_nat = | SS =
| RW_nat = | RW =
| LW_nat = | LW =
| CF_nat = | CF =
}}
{{football squad on pitch
| GK_nat = | GK =
| RB_nat = | RB =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat = | L =
| RCM_nat = | Fıtı =
| LCM_nat = | Efser =
| AM_nat = | Veysel =
| RW_nat = | Feqan =
| LW_nat = | Bunyad =
| CF_nat = | Nesirov =
}}
{{football squad on pitch
| GK_nat = | GK =
| RB_nat = | RB =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat = | LB =
| RCM_nat = | RCM =
| LCM_nat = | LCM =
| AM_nat = | AM =
| RM_nat = | RM =
| LM_nat = | LM =
| CF_nat = | CF =
}}
{{football squad on pitch
| GK_nat = | GK =
| RB_nat = | RB =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat = | LB =
| RCM_nat = | RCM =
| LCM_nat = | LCM =
| RW_nat = | RW =
| LW_nat = | LW =
| RCF_nat = | RCF =
| LCF_nat = | LCF =
}}
{{football squad on pitch|image=striped
| GK_nat = | GK =
| RB_nat = | RB =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat = | LB =
| RCM_nat = | RCM =
| LCM_nat = | LCM =
| RW_nat = | RW =
| LW_nat = | LW =
| RCF_nat = | RCF =
| LCF_nat = | LCF =
}}
Flags
[ସମ୍ପାଦନା]The XX_nat parameters may be used to add national flags for the players. The ISO country code must be supported by {{flagicon}}.
Alignment and width
[ସମ୍ପାଦନା]By default, the diagram will float to the center of the page or column. To float the diagram to the left, use |align=left. To float the diagram to the right, use |align=right.
By default, the diagram width is set to 200px. To change the width, use |width=NUM, where NUM is a raw number, without the px units.
Long labels
[ସମ୍ପାଦନା]If the label is too long, and is being clipped on the left or right edge of the diagram, try shifting it using |POS_shift=num, where POS is the position and num is a raw number in em units. This feature is currently only enabled for positions near the left and right edge of the diagram.
Caption
[ସମ୍ପାଦନା]To add a caption, use |caption=.
Background image
[ସମ୍ପାଦନା]To use a striped image, instead of the default checked image, use |image=striped.
See also
[ସମ୍ପାଦନା]